Texas Instruments TI-Nspire Guide Book

48 Analyzing the Data in Table View
Handheld: Select the first cell by pressing the Touchpad and holding
until the cell is filled. Release and move the cursor across cells until
the row is selected. Move the cursor to the bottom or top of the
screen to select the rest of the region. Click the Touchpad to complete
the selection.
In this example, row 21 is selected as the beginning area and row 147
as the end.
4. Click
Data > Strike Data.
Handheld: Press b, and then click Data > Strike Data.
5. Select one of the following:
•
In Selected Region: Strike the data from the area you selected.
• Outside Selected Region: Strike all data except the area you
selected.
The selected data is removed from the table.
Restoring Struck Data
You can restore previously struck data in any view.
1. Select the range of data to restore or if restoring all struck data, start
at step two.
2. Click
Data > Restore Data.
3. Select one of the following:
•
In Selected Region - Restore data in the selected area.
• Outside Selected Region - Restore data outside the selected area.
Beginning of
selection
End of selection.

Texas Instruments TI-Nspire Specifications

General

Type	Display
Form factor	Pocket
Product color	Blue, White
Display resolution	320 x 240 pixels
Display size (HxV) (imperial)	0 \
Compatible operating systems	Windows Vista/XP Mac OS X 10.4/10.5
Battery type	AAA
Number of batteries supported	4

Weight and Dimensions

Dimensions (WxDxH)	100 x 198.3 x 28.7 mm