72 Working with Advanced Analysis Features
2. Select the data set to replay from the Data Set drop-down list.
Note: Changing the run in the Data Set selection tool does not affect
the playback choice. You must specify which data set in
Experiment > Replay > Advanced Settings.
3. (Optional) Select a new value from the Base Column drop-down list.
The selected column acts as the “Time” column for the replay.
Note: The base column should be a strictly increasing list of numbers.
4. Click
Start to start the playback and save the settings.
Note: Data Set and Base Column options are based on the number of
stored runs and the sensor type used.
Starting the Playback
To start the playback:
Select
Experiment > Replay > Start Playback.
Playback of the data set run starts, and the Data Collection Control
buttons change to Stop Playback, Pause, and Advance by One Point.
The Advanced by One Point button (and menu item) is inactive until
you pause the replay.
Pausing the Playback
To pause the playback:
Select
Experiment > Replay > Pause or click .
The following events occur:
• The playback pauses.
• The menu option changes to "Resume."
• The button changes to .
• The menu option Advance by One Point becomes active.
Restarting the Playback
To restart the playback after pausing:
Select
Experiment > Replay > Resume.
The playback resumes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
