MEC 320 GENSET CONTROLLER
PM079 Rev 0 07/06/08 41 Thomson Technology
The selectable values and measurements are presented in the table on page 44 in this
handbook.
If the text ‘no text’ is selected in all 3 lines in a window, it will not be displayed. This is to get a
continuous displaying, if a window is not to be used.
It is only possible to configure the view windows via the PC software
configuration via the display unit is not possible.
There is a maximum of 15 configurable view windows in V1.
Click here to change the configuration.
To Next Page
Loading...
