MEC 320 GENSET CONTROLLER
PM079 Rev 0 07/06/08 61 Thomson Technology
Select language 1 and write the relevant text.
When the relevant texts have been configured, they can be downloaded to the unit.
Select the text to be
configured:
Tacho
Write the relevant text here.
In this example:
Omdr pr min#####omdr
There is a maximum of 20 characters/text. The symbol ##### is included an
in this case use up 5 characters. It is not possible to change the number of
characters in the measurement symbol (#####).
The symbol ‘#####’ indicates the measured value (in this case the actual RPM).
To Next Page
Loading...
