4.4 Commands
PM100 / page 38
Description: Queries the device’s Standard Event Status Enable Register
(see also IEEE488.2-1992-§10.11 and Chapter ‘Status
Reporting’).
Standard Event Status Register Query
Command syntax:
*ESR?
Response syntax:
<NR1 NUMERIC RESPONSE DATA>
Description: Queries the device’s Standard Event Status Register (see also
IEEE488.2-1992-§10.12 and Chapter ‘Status Reporting’).
Clear Status Command
Command syntax:
*CLS
Response syntax: None
Description: Clears the following device’s status registers (see also
IEEE488.2-1992-§10.3):
• Standard Event Status Register
• Device Error Event Register and Device Error Event
Enable Register
• Device State Event Register and Device State Event
Enable Register
To Next Page
Loading...
