THRUSH AIRCRAFT, INC – MODEL S2R-G10
AIRCRAFT MAINTENANCE MANUAL
Effective: 03/26/2010 Page 8-9
an external red marker (bug) that can be
set at the maximum torque value.
Torque less than 100% varies linearly
from zero at 0 PSIG to 100% at the test
cell value. That is, 75% torque is a
pressure reading of ¾ times the
maximum pressure, etc. Figure 8-3 is an
example of a graphical means of making
this conversion, but the chart for each
engine will vary slightly.
Figure 8-3: Left Instrument Panel
Figure 8-4: Example Torque Conversion Chart
To Next Page
Loading...
