THRUSH AIRCRAFT, INC – MODEL S2R-G10
AIRCRAFT MAINTENANCE MANUAL
LUBRICATION
For the lubrication requirements, refer to Figure 2-4: Lubrication Chart (9 sheets). Before
adding grease to fittings, wipe the fittings clean. Lubricate the fittings and wipe off the excess
lubricant. Lubricate the hinges with a squirt can or a brush moistened with oil. Wipe off the
excess oil to prevent accumulation of dirt and grit.
THE DRAWINGS OF FIGURE 2-4, SHEETS 1
THRU 9, ARE FOR LUBRICATION REFERENCE
ONLY. THEY DO NOT NECESSARILY SHOW
PROPER ASSEMBLY DETAILS AND ARE NOT
TO BE USED AS ASSEMBLY REFERENCE..
Figure 2-4: Lubrication Chart (Sheet 1 of 9)
2-30
APPLICATION SYMBOL
SPECIFICATIONS AND TYPE OF
LUBRICANT
HAND PACK
MIL-G-81322 (AEROSHELL 22)
AIRCRAFT GREASE
LUBRICATION GUN
MIL-G-81322 (AEROSHELL 22)
AIRCRAFT GREASE
OIL CAN
MIL-L-22851 (AEROSHELL OIL W
15W50) OR EQUIVALENT –
LUBRICATING OIL
* NOTE*
Use only MIL-G-24139 (Aeroshell 6) grease in
propeller.
WARNING
Page Effective 03/26/2010
To Next Page
Loading...
