THRUSH AIRCRAFT, INC – MODEL S2RHG-T65 TURBO THRUSH
AIRCRAFT MAINTENANCE MANUAL
Figure 2-3: G10 Servicing and Inspection Guide
Table 2-2: INSPECTION CHECK LIST
A: PROPELLER
Refer to Hartzell Manual #139 Propeller Owner’s
Manual and Logbook or Appropriate McCauley
Maintenance Manual.
Daily
50
hrs
100
hrs
400
hrs
1. Remove the spinner and check for cracks. X
2. Check the back plate for cracks and corrosion. X
3. Check for grease and oil leaks. X
4.
Check the hub bolts and balance screws of the
blades for safety.
X
5. Inspect the blades for nicks and cracks. X
6. Inspect the hub parts for cracks and corrosion. X
7.
For Hartzell only. Lubricate the propeller with
Aeroshell 6 grease only. Remove the rear “Zerk”
fitting from each blade clamp. Using a hand
operated grease gun, grease each forward fitting
slowly. Lubrication is complete when grease
emerges in a steady flow with no air pockets or
moisture, and has the color and texture of the new
grease. Reinstalled the rear “Zerk” fittings.
X
8. Check counterweight bolts for safety. X
9. Check the propeller shaft seal for oil leaks. X
10. Reinstall spinner. X
Effective: 09/16/05 2-14
To Next Page
Loading...
