The tank has been over filled. Pump out excess liquid
while power is applied until the Finch Display is
indicating liquid.
Display shows an error code
Exx, where xx is a 2 digit code
E 00 Can’t Auto range, can’t measure level
E 01 Too many samples rejected, too much
turbulence
E 02 Internal transmitter error
E 04 Internal transmitter error
E 10 Internal transmitter error
E 20 Level detection error
E 40 Internal transmitter error
E 80 Internal strapping table error
E 81 Internal strapping table error
E 82 Internal strapping table error
E 83 Internal strapping table error
E 84 Internal strapping table error