Toa RM-200M - Page 57

57
Step 1. Press the OK key on the Emergency broadcast setting screen.
The setting screen for the Emergency broadcast function is
displayed.
Note
Pressing the cancel key returns the display to the original
screen.
Step 2. Set the Emergency manual control time-out period using the [+]
or [ - ] key.
OFF (default): No time-out control
1 – 99 SEC: Time-out period
Step 3. Press the OK key.
Note
Pressing the Cancel key before registering the time-out value by
pressing the OK key cancels the set contents and returns the
display to the Emergency broadcast setting screen.
Step 4. Press the Cancel key.
The display reverts to the configuration setting screen.
[Emergency broadcast setting]
Set the Emergency broadcast function following the procedure below.
OK
71:TI M E O UT
OF F
7
:
E MG BR O ADCAST
SETT I
NG
Time-out setting
Emergency broadcast setting
1