1-5
1.3 GLOSSARY
[A/AX/AXIS] Astigmatism axial angle [0° to 180°] Represents the angle of
astigmatism at which the power is located in the direction crossing
the astigmatism axis.
[AA] Auto-alignment.
[AS] Auto shot.
[AVG] Average of strong and weak principal meridians.
[BC] Contact lens inner curvature (base curve) [mm]
[C/CYL] Cylindrical power [D]
[CAT MODE] Cataract mode at the time of refractive measurement.
[CL MODE] Measuring mode for hard contact lens base curve.
[CL DATA] First prior selection of base curve by contact lens brand on the
basis of refkerato-data, which is useful for selection of reference
trial lens.
[CORNEA] Represents corneal diameter in the corneal diameter and pupillary
diameter measurement [DIA] mode.
[IOL MODE] IOL measuring mode at refractive measurement.
[K1] Weak Principal meridian [mm or D]
[K2] Strong Principal meridian [mm or D]
[P] Contact lens power.
[PD] Pupillary distance [mm]
[PUPIL] Represents the pupillary diameter in the corneal diameter and pu-
pillary diameter measuring [DIA] mode.
[RA] Residual astigmatism (See [Residual astigmatism])
[S/SPH] Spherical power [D]
[Temporary] Changes measurement conditions temporarily.
1.3 GLOSSARY
To Next Page
Loading...
Need help?
General
