3-3
3.2 PREPARATION FOR MEASUREMENT
In the event this instrument encounters smokes,
odors, or abnormal noises, immediately turn the
power off, disconnect the Power plug from the
receptacle. Next report such abnormal condition to
your local distributor, representative, or Tomey
Corporation.
Do not lay yourself nor apply undue force to this
instrument, or it may fall down, also possibly
causing instrument damages or personal injuries.
Do not place or leave any bin or bottle containing
any liquid on the instrument, or it may cause struck
by electricity or malfunctions.
3.2.1 Starting of instrument operation
Turn the Power Switch $ on.
The Power Lamp will light up and the Measurement Screen will
be displayed.
The machine starts at the measurement mode in which it was
turned off.
Ԙ
10
1((
3.2 PREPARATION FOR MEASUREMENT
To Next Page
Loading...
