Tomey RC-5000 - ID Input with Tomey Form

3-24
3.7 ID INPUT WITH TOMEY FORM
With TOMEY FORM for data output the measured data can be
transferred through RS-232C port by setting as in Fig. 1. When
TOMEY Link button on the base is pressed after setting this way,
The key display for patient's ID input will be shown on the display
and the ID can be input by touching the panel/
After the measurement, the measured data will be output almost
the same time as the printout.
Please consult TOMEY CORPRATION or its authorized dis-
tributor for the detail.

(Fig. 1)
(Fig. 2)
3.7 ID INPUT WITH TOMEY FORM