1-1
1. PRIOR TO USE
Please read this Operation Manual throughout before
operating this instrument.
Do not use any procedures other than specified in this
Manual.
1.1 SAFETY PRECAUTIONS
The following precautions shall be given for installing this
instrument.
- Do not install the instrument in a place where any chemicals are
stored or any gas is generated, or it may otherwise be inflamed to
catch a fire, if such chemicals or gas is spilled or evaporates into
the inside of the instrument.
- Do not lift the instrument by holding the Chin Rest or the Head
Rest, which may otherwise cause the instrument to slip to fall
down and possibly harm you.
- Make sure that the frequency, voltage, allowable current (or
consumption power) of your power source used for the
instrument are proper. The wrong power, if used, may cause
inflammation or electric shock.
- Properly connect the grounding wire, which may otherwise cause
struck by electricity.
- Do not place a heavy object over the power cord nor squeeze it
with undue force, or it may cause inflammation or electric shock.
- Be sure to securely connect the power cord with the instrument.
The power cord, if improperly connected in contact failure, with
the metallic part, or with the exposed plug terminal covered with
dust, may cause inflammation or electric shock.
- Do not connect the instrument to any equipment of which data
transfer code is different from that for this instrument. Which may
cause inflammation or struck by electricity. In case of connecting
this instrument to the communication connector, be sure to
consult with Tomey Corporation.
1.1 SAFETY PRECAUTIONS
To Next Page
Loading...
Need help?
General
