3-32
3.8 SETUP OF MEASUREMENT CONDITIONS
3.8.2 Temporary Setup
Please us the CL data just as a reference for
selecting the trial lens in contact lens fitting. Please
make sure fitting inspection when fitting contact
lenses.
Please be sure that the auto fogging is released
only in the case the accommodation can be ignored.
Otherwise accommodation will be Included in
refractory data. Release of auto fogging makes the
measurement time shorter and the refactometry
easier, but it is an important method to reduce the
accommodation.
This setting is for temporary measurement. This set up is released
when Printout ( or data output) is done or Clear button is pressed
as these actions are regarded preparation of the next patient. See
"3.8.1 Setup" to set up for continuous operation.
Press Temp button $in Fig.1. There are seven setting items
divided into three screens and the level selection of each item is
done on each screen with Arrow keys.
After the selection press Exit button &. The selected level is fixed
and the measurement screen will be displayed.
REF VD
In refractometry the Corneal Vertex Distance can be changed
temporarily.
CL / 12.0 / 13.5 / 14.0 / 15.5 / 16.0
Ԙ
(Fig. 1)
Ԛ
ԙ
(Fig. 2)
To Next Page
Loading...
Need help?
General
