3-2
3.1.2 Precautions for connecting of the Power Cord
Make sure that the frequency, voltage, and
allowable current (or consumption power) of the
power source are proper as specified, which may
otherwise cause inflammation or struck by
electricity.
The Power Plug shall be connected to the
receptacle grounding wire, which may otherwise
cause struck by electricity.
Care shall be given not to cause the Power Cord to
be placed under a heavy object or weighted with
undue pressure, which may cause inflammation or
struck by electricity.
Securely connect the Power Cord. If the Power
Cord is not properly connected, touches the
metallic part or connected with dust-exposed plug
terminal, may cause inflammation or struck by
electricity.
3.1.3 Checking of the printer paper
Do not touch the Printer Paper Cutter with your
hand, or you may cut yourself.
Remove the Printer cover and make sure that the Printer pa-
per roll is installed in its proper position. As for the details of
removing the Printer cover, see "5.5.1 Replacing of the Printer
Paper".
In case of using an externally connected Printer, ask Tomey Cor-
poration of your distributor or representative.
3.1 INSTALLING
To Next Page
Loading...
Need help?
General
