3-1
3.1 INSTALLING
3. OPERATING PROCEDURES
3.1 INSTALLING
3.1.1 Precautions for installation
Install the instrument in a place where it is free
from water and chemicals, if such things are enter
into the instrument inside, may cause struck by
electricity or system malfunctions.
Do not install the instrument in a place where any
chemicals are stored or any gas is generated, if
such chemicals are spilled or evaporated to enter
into instrument inside part, may cause
inflammation or subsequently a fire.
Do not hold the Chin Rest or the Head Rest when
lifting the instrument, which may cause it to slip
and fall off from your hand and harm you or
damage the instrument.
Do not install the instrument in a place where it is
subjected to direct sunbeams, high temperature or
high humidity, or exposed to air including dust,
salts, or sulfur, or in any place where it may have
any adverse influences, since it may otherwise
cause its malfunction or erroneous operation.
Install the instrument in a stable place where it is
free from tilting, vibration, or shocks, or it may
otherwise not perform correct measurement, or
may cause its inflammation or human injuries.