3-20
3.5 DISPLAY OF MEMORY DATA
This function displays various measurement data saved in the
memory in the Monitor.
Pressing of the Clear button deletes all the data
saved in the Memory.
If measurement is given after measured data has
been printed out, such printed out data will be
deleted from the Memory.
1) The data display screen (Fig. 2) will be shown when Data
button on the touch panel $.
2) Select the measured data with Mode button %down on
the screen. The selected data will be shown. "NO VALUE"
will be shown in case no data is stored.
3) Pressing Tbutton / Sbutton ( moves the triangular mark
on the head of the data line. The data with the triangle can
be erased with Eraser button ).
4) In the Kerato data screen (Fig. 3) each of Ø3 data and Ø6
will be shown by pressing Ø3/Ø6 Change button * alter-
natively when both of the data are stored. And pressing R/
L button +changes the right screen and left dataascreen.
5) Return button ,will bring back to the former screen
( Fig.1).
Ԙ
4'(4#%6/'6'4
4+)*6 .'(6
8&
0Q 52* %;. #:5 '40Q 52* %;. #:5 '4
018#.7'
ԙ
Ԛԛ
Ԝ
ԝ
Ԡ
-'4#61/'6'4
4+)*6
OO &#: '
OO
#8)
#:
%;.
0Q
- -
OO #:
#8)
Ԟ
ԟ
Ԡ
ԝ
(Fig. 1)
(Fig. 2)
(Fig. 3)
3.5 DISPLAY OF MEMORY DATA
To Next Page
Loading...
Need help?
General
