Tomey RC-5000 User Manual

3-25
3.8 SETUP OF MEASUREMENT CONDITIONS
3.8.1 Setup
The operating conditions are set, which will be effective as
long as the set up conditions are not changed.
Before changing the setup conditions, always
press the Save & Exit button to finish the operation.
If the operation is finished with the Cancel button,
the setup conditions will be returned to the
previously setup screen, without saving the
change.
Press the Setup button $ in the Touch Panel to change the
screen to the Setup Screen (Fig. 2). Next, select the items to
be set by pressing the icons % on the left side of the screen.
and set them at each of their Setup screen.
After setting-up has been completed, press the icon & and
change the screen to the Setup Screen (Fig. 2). Next press the
Save & Exit button ', so the setup items will be saved and
the screen will be returned to the initial measurement screen.
If pressing the Cancel button (, the screen will be returned
to the initial measurement screen without doing any opera-
tion.
y Common 1: Item common to each measurement
y Common 2: Item common to each measurement
y REF 1: Item related to refractometer measurement
y REF 2: Item related to refractometer measurement
y KRT: Item related to keratometer measurement
y Output: Item related to data output
y Information: Product information
Ԙ
ԙ
Ԛ
ԛ
Ԝ
(Fig. 1)
(Fig. 2)
3.8 SETUP OF MEASUREMENT CONDITIONS

Tomey RC-5000 Specifications

General

Brand	Tomey
Model	RC-5000
Category	Measuring Instruments
Language	English