Tonghui TH2827 Series - Page 19

TH2827 Series Operation Manual Chapter 3 Introduction to [MEAS]
13
3) Press Cs—…→, the following parameters will be shown for your choice.
 Cs-D
 Cs-Q
 Cs-Rs
 ←
Press the soft key corresponding to your desired parameter. Then press ← to
return to upper soft key menu.
4) Press L
p
—…→, the following parameters will be shown for your choice.
 L
p
-D
 L
p
-Q
 L
p
-G
 L
p
-Rp
 ←
Press the soft key corresponding to your desired parameter. Then press ← to
return to upper soft key menu.
5) Press Ls—…→, the following parameters will be shown for your choice.
 Ls-D
 Ls-Q
 Ls-Rs
 ←
Press the soft key corresponding to your desired parameter. Then press ← to
return to upper soft key menu.
6) Press ↓, another group of soft keys will be shown.
 Z—…→
 Y—…→
 R—…→
 ↑
 ↓
7) Press Z—…→, the following parameters will be shown for your choice.
 Z-d
 Z-r
 ←
Press the soft key corresponding to your desired parameter. Then press ← to
return to upper soft key menu.
8) Press Y—…→, the following parameters will be shown for your choice.
 Y-d
 Y-r
 ←