6-32
6 SPECIAL MODE (Menu Mode)
6.6.3 Search Data
To search for input data, carry out the following operating procedure.
6.6.4 Edit Data
To edit input data, carry out the following operating procedure.
Operating procedure Operation Display
1
After pressing the
{MENU}
key, press the
{F4}
(P
↓
),
{F2}
,
{F4}
key to get the programs menu on page 2/
2.
{MENU}
{F4}
{F2}
{F4}
2 Press the {F3}, {F1}, {F2}, {F2} key.
(
Refer to “Search data” on page 6-26.)
{F3}
{F1}
{F2}
{F2}
3 To search from the first data, select {F1} (FIRST
DATA).
{F1}
4 To switch to different data, press the [
↓
] or [↑] key.
[↓] or [↑]
Operating procedure Operation Display
1 In DATA SEARCH, press the {F1} key.
2 Edit the data.
{F1}
Edit
data
PROGRAMS 2/2
F1:AREA
F2:POINT TO LINE
F3:ROAD P↓
DATA SEARCH
F1:FIRST DATA
F2:LAST DATA
LINE 01/30
L : 100.000 m
AZ: 45°00’00”
EDIT ↓
SPIRAL 30/30
R : 200.000 m
L : 100.000 m
EDIT ↓
LINE 01/30
L : 100.000 m
AZ: 45°00’00”
EDIT ↓
LINE 01
L = 100.000 m
AZ: 45°00’00”
--- --- [CLR] [ENT]
To Next Page
Loading...
