Topcon ES-65 - Coordinate Data Searching

9-5
9 MEMORY MANAGER MODE
9.2.2 Coordinate Data Searching
Example searching: Point number searching
Operating procedure Operation Display
1 Press the {F3} (MEMORY MGR.) key from the
menu 1/3.
{F3}
2 Press the {F2} (SEARCH) key.
{F2}
3 Press the {F2} (COORD. DATA) key.
{F2}
4 Press the {F1} (INPUT) key and enter File Name.
Press the {F4} (ENT) key. *1)
{F1}
Enter FN
{F4}
5 Press the {F3} (PT# DATA) key.
{F3}
6 Enter PT#.
Press the {F4} (ENT) key. *1)
Enter PT#
{F4}
7 Press the {F4} ( ↓ ) key to get the next page.
{F4}
*1)
Refer to Section 2.4 “How to Enter Alphanumeric Characters”.

•"  " represents data shown on the display is the stored data.
• Press the {} or {} key to scroll to next or previous point.
• To search COORD. DATA of the same point number, press the {} or {} key.
• PTL data will be shown below.
MEMORY MGR. 1/3
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN P
↓
SEARCH
F1:MEAS. DATA
F2:COORD. DATA
F3:PCODE LIB.
SELECT A FILE
FN:_________
INPUT LIST ––– ENTER
COORD. DATA SEARCH
F1:FIRST DATA
F2:LAST DATA
F3:PT# DATA
PT# DATA SEARCH
PT#=_________
[ALP][SPC][CLR][ENT]
PT#  TOP-104 1/2
N
 100.234 m
E
 12.345 m
Z
 1.678 m ↓
PCODE  TOPS 2/2
STR.

↓
PT#  TOP-105 1/2
L
 10.000 m
O
 20.000 m
E
 0.000 m ↓
PCODE  TOPS 2/2
STR.

FROM  TOP-101
TO
 TOP-102 ↓
{F4}