Using the GNSS Compass, Camera
GRS-1 Operator’s Manual
4-10
• Brightness – Select a brightness of the captured image. Settings
are from -3 to +3.
• Resolution – select the resolution in bits of the image to capture.
Settings are from 160x120 to 1600x1200.
• Zoom – select the scaling factor. Settings are from zoom 1 to 4.
Figure 4-9. Adjust Camera Settings
To set the macro and long distance modes: turn the dial to the left
for macro mode and to the right for long distance mode as shown in
Figure 4-10.
Do not use the camera with the camera dial set
halfway between the macro and long distance mode
settings.
To Next Page
Loading...
