Toro Dingo TX 413 User Manual

Rev. 000
TX 413 Service Manual
8-23
DRIVE SYSTEM
5. Install the right side rod linkage with a bolt
through the bearing rod end, spacer, through the
drive rod assembly and install the nut and tighten
(Fig. 500).
Figure 500 DSC-1264
4. Install the left side rod linkage with a bolt through
the bearing rod end, spacer, through the drive
rod assembly and install the nut and tighten (Fig.
499).
Figure 499 DSC-1263
Figure 501 DSC-1247
7. Install the rear cover.
6. Insert the bolt and nut into the traction control
handle assembly and through the drive rod
assembly.
Note: The control handle assembly is slotted,
so you need to align the assembly before
tightening the bolt and nut (Fig. 501).

Toro Dingo TX 413 Specifications

General

Brand	Toro
Model	Dingo TX 413
Category	Compact Loader
Language	English