Toro Dingo TX 413 - Nose Roller Removal

ATTACHMENTS
10-23TX 413 Service Manual
Rev. 001
Fig 081 CLR DSC-0236
5. Slide/remove the boom from the boom mount arm
(Fig. 081).
Nose Roller Removal
1. Remove the screw, washer and pin assembly from
the nose roller (Fig. 082).
Fig 082 CLR DSC-0238
2. Slide the nose roller out of the boom. Remove the
roller caps from each side of the roller. Remove the
slotted spacers from each side of the nose roller
(Fig. 083).
Fig 083 CLR DSC-0239