Toro Multi Pro WM - Connecting the Speed Sensor Harness

g028456
Figure15
1.Slot(batterybase)3.Tab(batterycover)
2.Cover(positivebattery
terminal)
4.Terminal(negativebattery
cable)
2.Slidethecoverbackandremovethenegative
batteryterminalfromthebattery(Figure15).
3.Removethepositivebatteryterminalfromthe
battery(Figure15).
7
ConnectingtheSpeed
SensorHarness
NoPartsRequired
ConnectingtheSpeedSensor
Harness(HD-SeriesModelswitha
ManualTransmission)
1.Atthewireharnessforthesprayer,locatethe
3-socketconnectorforthespeedsensorcircuit
andthe3-pinconnectorforthevehiclecircuit.
2.Atthetransaxleofthemachine,connectthe
3-pinconnectorofthewireharnessofthe
machineforspeedsensorintothe3-socket
connectorofthesprayerharnessforthespeed
sensor(Figure16).
g024088
Figure16
1.Existingspeedsensorplugs
3.Connectthe3-pinconnectorforthevehicle
circuitofthewireharnessofthesprayerintothe
3-pinsocketforthevehiclecircuitofthewire
harnessforthemachine.
ConnectingtheSpeedSensor
Harness(HDX-AutoModel)
1.Atthewireharnessforthesprayer,locatethe
3-socketconnectorforthespeedsensorcircuit
(Figure17).
g028436
Figure17
1.3-pinconnector(machine
wireharness—speed
sensor)
4.Rearframetube
2.3-socketconnector
(sprayerwire
harness—speedsensor)
5.Backofthemachine
3.Hydraulictank
6.Rightsideofthemachine
22