Toro Multi Pro WM - Operating the Sprayer

7.Checkthegasketforthedrainplug(located
insidethebowl)andthegasketforbowl(located
insidethelterhead)fordamageandwear
(Figure79).
Important:Replaceanydamagedorworn
gasketsfortheplug,bowl,orboth.
8.Installthepressurelterelementintothelter
head(Figure79).
Note:Ensurethatthelterelementisrmly
seatedintothelterhead.
9.Installthebowlontothelterhead,andtighten
byhand(Figure79).
10.Assemblethedraincapontothettingatthe
bottomofthebowl,andtightenthecapbyhand
(Figure79).
CleaningtheNozzleFilter
1.Parkthemachineonalevelsurface,engagethe
parkingbrake,shutoffthesprayerpump,shut
offtheengine,andremovethekey.
2.Removethenozzlefromthesprayturret(Figure
80).
g209504
Figure80
1.Sprayturret
3.Nozzle
2.Nozzlelter
3.Removethenozzlelter(Figure80).
4.Cleanthenozzlelterwithcleanwater.
Important:Replacethelterifitisdamaged
orcannotbecleaned.
5.Installthenozzlelter(Figure80).
Note:Ensurethatthelterisfullyseated.
6.Installthenozzleontothesprayturret(Figure
80).
InspectingtheTankStraps
ServiceInterval:Beforeeachuseordaily—Check
thetankstraps.
Important:Overtighteningthetankstrap
fastenerscanresultindeforminganddamaging
thetankandstraps.
1.Fillthemaintankwithwater.
2.Checktoseeifthereisanymovementbetween
thetankstrapsandthetank(Figure81).
g028263
Figure81
1.Reartankstrap4.Forwardtankstrap
2.Bolt
5.Frontofthemachine
3.Flangedlocknut
3.Ifthetankstrapstloosetothetank,tightenthe
angedlocknutsandboltsatthetopofstraps
untilthestrapsareushwiththesurfaceofthe
tank(Figure81).
Note:Donotovertightenthetankstrap
hardware.
OperatingtheSprayer
TooperatetheMultiProWM,rstllthespraytank,
thenapplythesolutiontotheworkarea,andnally
cleanthetank.Itisimportantthatyoucompleteall3
ofthesestepsinsuccessiontoavoiddamagingthe
sprayer.Forexample,donotmixandaddchemicals
inthespraytankatnightandthensprayinthe
morning.Thiswouldcausethechemicalstoseparate
andpossiblydamagethesprayercomponents.
Important:Thetankmarkingsareforreference
onlyandcannotbeconsideredaccuratefor
calibration.
55