Toro Multi Pro WM - Lubrication; Greasing the Sprayer System; Greasing the Sprayer Pump

theendofcylinderbarrelandontherodendof
theliftcylinder(Figure98).
g009164
Figure98
1.Bedsupport3.Bed
2.Cylinderbarrel
LoweringtheTankAssembly
1.Whenyouarereadytolowerthetankassembly,
removethebedsupportfromthecylinderand
insertitintothebracketsonthebackofthe
ROPSpanel.
Important:Donottrytolowerthetank
assemblywiththebedsafetysupportonthe
cylinder.
2.Retracttheliftcylinderstocarefullylowerthe
tanktotheframe.
3.Installthe2holddownboltsandfastenersto
securethetankassembly.
4.Foldtheboomextensionsrearwardtothe
extendedposition.
5.Usetheboom-controlswitchestoraisethe
boomextensionstotheTRANSPORTposition.
Lubrication
GreasingtheSprayer
System
ServiceInterval:Every100hours
Lubricateallbearingsandbushingsafterevery
100hoursoronceayear,whicheveroccursrst.
GreaseType:No.2lithiumgrease
1.Wipethegreasettingcleansothatforeign
mattercannotbeforcedintothebearingor
bushing.
2.Pumpgreaseintothebearingorbushing.
3.Wipeofftheexcessgrease.
GreasingtheSprayerPump
ServiceInterval:Every50hours
GreaseType:MobilXHP461
1.Locatethegreasettingsonthesprayerpump.
Note:Thepumpislocatedattherearendof
themachine.
g208179
Figure99
1.Sprayerpump2.Greasetting
2.Wipethe2remotegreasettingsclean.
3.Pumpgreaseintoeachremotegreasetting.
4.Wipeofftheexcessgrease.
70