Toro ProLine H800 - Page 190

RemovingtheHopperTiltCylinder(continued)
g294041
Figure95
1.Femalequickcoupler7.Hose
2.Bracket8.Hose
3.Hose9.Bolt
4.Bolt10.Hydrauliccylinder
5.O-ring
11.Auxiliarycontrolvalve
6.Hose12.Hose
WARNING
Beforeopeningthehydraulicsystem,operateallthehydraulic
controlstoreleasesystempressureandavoidinjuryfromthe
pressurizedhydraulicuid;refertoReleasingPressurefromthe
HydraulicSystem(page5–5).
4.Disconnectthehydraulichosesfromthettingsinthehoppertiltcylinderthat
istoberemoved.Allowthehosestodrainintoasuitablecontainer.Remove
anddiscardtheO-ringsfromthettings.
5.Installcleancapsorplugsonthehydraulichosesandttingstoprevent
contamination.
6.Removethenut(item2inFigure94)andbolt(4)thatsecuresthehoppertilt
cylinder(7)tothehopperframe(1).
7.Removethebolt(10),washer(9)andpin(8)thatsecuresthehoppertilt
cylinder(7)tothesupportframe(11).
8.Removethehoppertiltcylinderfromthemachine.
HydraulicSystem:ServiceandRepairs
Page5–122
ProLineH800
19241SLRevB