Toro ProLine H800 - Electrical System Maintenance; Electrical System Safety; Accessing the Battery

RemovingtheRadiator(continued)
g289054
Figure16
1.Oilcooler
5.Bracket
2.Nut6.Hydraulichose
3.Bolt7.Hydraulichose
4.Washer
CAUTION
Beforeopeningthehydraulicsystem,operateallhydrauliccontrols
torelievesystempressureandavoidinjuryfrompressurized
hydraulicuid.
7.ReadtheGeneralPrecautionsforRemovingandInstallingtheHydraulic
SystemComponents(page5–63).
8.Cleanthehydraulictubeendsandoilcoolerttingstopreventhydraulic
contamination.
9.Disconnectthehydraulichosesfromtheradiator.Positionhosesawayfrom
theradiator.
10.Coverorplugthehydraulichosestopreventcontamination.
11.Disconnecttheradiatorhoses(upperandlower)fromtheradiator.
12.Loosenthehoseclampandremoveoverowhosefromtheradiatorll
opening.
13.Removecoolantreservoirfrombracketonthecableguard.
14.Disconnecttheelectricalpowerconnectoroftheblower.Removethe4nuts
and4boltsthatsecurestheblowertotheradiator.
15.Removetheblowerfromtheradiator.
16.Supporttheradiatorassemblybeforelooseningmountingfasteners.
17.Removethe2nutsand2bushingsthatsecuretheradiatortotheradiator
support.
18.Carefullypulltheradiatorassemblyfromthemachine.Plugtheradiatorand
hoseopeningtopreventcontamination.
19.Ifnecessary,disassembletheradiator(Figure14).
ProLineH800
Page4–9
Engine:ServiceandRepairs
19241SLRevB