Reelmaster 5200-D/5400-D Hydraulic SystemPage 4 - 81
2. Apply Permabond LH150 or equivalent to the
threads of the hydraulic straight fitting (suction). Secure
fitting to the suction strainer.
3. Apply Permabond LH150 or equivalent to the
threads of the suction strainer.
4. Using a wrench, turn strainer into port at least 1-1/2
to 2 full turns beyond finger tight.
5. Apply an anti-sieze compound to three cap screws
securing the reservoir to the frame.
6. Fill reservoir with hydraulic fluid (see Change Hy-
draulic Fluid).
Hydraulic
Systems
To Next Page
Loading...
Need help?
General
