EasyManuals Logo

Toshiba Bar Code Printer User Manual

Toshiba Bar Code Printer
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40
z Icons Used for Printer Image and LCD Message Display
Icon Status Name LCD Message Display Description
SUPPORTED PRINTERS
Off-line
Printer is not connected or recognized.
Printer is being monitored properly.
Ribbon near end
Remaining amount of ribbon is low.
Saving SAVING
Writable characters or PC command is being
saved.
Returns to online mode after saving is
completed.
In pause state
An issue is being stopped by the [PAUSE] key.
Pressing the [RESTART] key continues to print.
Ribbon near end
Remaining amount of ribbon is low.
Command error COMMAND ERROR
Command error is occurring.
Please send a correct command.
When an error exists in a command sent from a
computer, 16 bytes of the command code of the
applicable command is displayed on the upper
line of the LCD.
Communication
error
COMMS ERROR
Communication error is occurring.
Turn the power switch off/on, or press the
[RESTART] key.
If the same error repeats, contact your local
service station.
FLASH WRITE ERR.
FORMAT ERROR
Memory error
FLASH CARD FULL
Memory error is occurring.
Several causes can be thought of. Handle the
matter with reference to ‘Error Message’ in
Owner’s Manual.
Write error to flash memory occurred.
Format error occurred in flash memory.
Saving failed due to insufficient free space of
flash memory.
RFID error RFID ERROR
RFID communication error is occurring.
Several causes can be thought of. Handle the
matter with reference to ‘Error Message’ in
Owner’s Manual.
Communication with RFID module is not
available.
Writing to chip failed.
Printer error
[Status Value]
********
Printer error is occurring.
Status value: 36
The voltage of the real time clock battery is
low.
Status value: Excluding 36
Other hardware/software problem is
occurring.
If the same problem repeats, turn the power off
and consult with your service engineer.
********
[Status Value] [H]
********
Head broken elements error is occurring.
The result of the head check by the TEC
Barcode Net Admin shows broken dots.
On-line /
Printing
ON LINE
PAUSE
Pause

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba Bar Code Printer and is the answer not in the manual?

Toshiba Bar Code Printer Specifications

General IconGeneral
BrandToshiba
ModelBar Code Printer
CategoryBarcode Reader
LanguageEnglish

Related product manuals