1.PREPARATION
Preparation 4 - Installing Printer and Scanner Drivers 47
1 PREPARATION
3
Turn the power of the equipment ON.
The Found New Hardware Wizard dialog box appears.
y If the Found New Hardware Wizard dialog box does not appear, turn this equipment off, and then on again. In
this case, turn off this equipment, and then wait approximately 10 seconds before turning it on again. If you turn
this equipment on immediately after turning it off, it may not function correctly.
y If a dialog box with a message saying “Windows Update” appears, select [No].
4
Click “No, not this time” and click [Next].
5
Click “Install from a list or specific location (Advanced)” and click [Next].
To Next Page
Loading...
