Toshiba e-studio281c - Page 54

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 32
[5]
A- --
B- --
C- --
D- --
E- --
F RADF connection RADF connected Not connected
G Platen sensor Platen cove opened Platen cover closed
H Carriage home position sensor Home position Other than home
position
[6]
A- --
B- --
C- --
D APS sensor (APS-R) No original Original present
E APS sensor (APS-C) No original Original present
F APS sensor (APS-3) No original Original present
G APS sensor (APS-2) No original Original present
H APS sensor (APS-1) No original Original present
[7]
A [RADF] Original tray sensor Original present No original
B [RADF] Original empty sensor Original present No original
C [RADF] Jam access cover sensor Cover opened Cover closed
D [RADF] RADF opening/closing sensor RADF opened RADF closed
E [RADF] Original exit/reverse sensor Original present No original
F [RADF] Original intermediate transport sensor Original present No original
G [RADF] Read sensor Original present No original
H
[RADF] Original registration sensor
Original present No original
[8]
A [RADF] Original tray width sensor (TWID0S)
(Refer to table2)
OFF (H) ON (L)
B [RADF] Original tray width sensor (TWID1S)
(Refer to table2)
OFF (H) ON (L)
C [RADF] Original tray width sensor (TWID2S)
(Refer to table2)
OFF (H) ON (L)
D- --
E [RADF] Original length detection sensor Original present No original
F [RADF] Original width detection sensor-1 Original present No original
G [RADF] Original width detection sensor-2 Original present No original
H- --
[9]
A Black toner cartridge switch Cartridge not
installed
Cartridge installed
B- --
C- --
D Bypass feed sensor No paper Paper present
E Registration sensor Paper present No paper
F- --
G- --
H Transfer belt home position sensor Home position Other tha home
position
Digital
key
Button Items to check
Contents
Highlighted display
e.g.
Normal display
e.g.
08/04