Toshiba e-studio281c - Page 55

© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 33
2
Table 2. Relation between the status of the original tray width sensor and paper size (width).
H (= high level): Open L (= low level): Short
[0]
A Bridge unit transport sensor 2 Paper present No paper
B Bridge unit cover open/close detection switch Cover opened Cover closed
C Bridge unit transport sensor 1 Paper present No paper
D Bridge unit paper full detection sensor Paper not full Paper full
E- --
F Charger cleaner front position detection switch Cleaner home posi-
tion
Other than home
position
G Charger cleaner rear position detection switch Cleaner rear posi-
tion
Other than rear posi-
tion
H- --
Original tray width sensor
Paper width size
(LT series)
Paper width size
(A4 series)
TWID2S TWID1S TWID0S
H
HH
LD/LT A3/A4
HHL
-B5-R
HLH
ST-R A5-R
L
HH
LD/LT A3/A4
LHL - -
LLH
8.5" x 8.5" / LT-R / LG /
13" LG
A4-R/FOLIO
LLL
COMPUTER B4/B5
Digital
key
Button Items to check
Contents
Highlighted display
e.g.
Normal display
e.g.
08/04