1. Easy Setup Flow
38 Network Administration Guide — Setup Flow for Scanning Features
Setup procedure
1. Setting up the TCP/IP.
This equipment must be connected to the TCP/IP network to use the Remote
Scan driver. You should set the TCP/IP from the Touch Panel Display the first
time
z User Functions Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
2. Advise users to install the Remote Scan driver.
Users can install the Remote Scan driver from the Client Utilities CD-ROM. For
more information about the installation, please see the Scanning Guide.
To Next Page
Loading...
