Toshiba E-STUDIO520 Network Administration Guide

1. Easy Setup Flow
Network Administration Guide — Setup Flow for Printing Features 19
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Windows 2000, Win-
dows XP, and Windows Server 2003 in a TCP/IP network. Even though IPP printing can
be used in a local area network, this method is commonly used to print over the Inter-
net. If you allow IPP printing through the Internet, you must configure the DNS server to
enable users to access this equipment over the Internet using the HTTP protocol. This
is useful when users want to print to this equipment from outside the local area network.
Setup procedure
1. Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
 Setting the TCP/IP Protocol
 Setting the HTTP Network Service
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
 Setting up the TCP/IP
 Setting up the HTTP Network Service
2. Setting up the DNS Session to be available the services that
use the DNS name with a DNS server.
The DNS Session should be configured when this equipment accesses the
services, servers, and clients using the DNS names instead of IP addresses.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
 Setting up the DNS Session
3. Setting up the DDNS Session if required.
If the DNS server supports the dynamic DNS service, please configure the
DDNS Session to enable the dynamic DNS service.
Windows 2000
Windows XP
Windows Server 200
3
Connecting over Internet
Setting up the IPP
printer connection

Toshiba E-STUDIO520 Specifications

General

Brand	Toshiba
Model	E-STUDIO520
Category	All in One Printer
Language	English