1. Easy Setup Flow
26 Network Administration Guide — Setup Flow for Printing Features
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
2. Setting up the LPD Print Service.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Print Service Settings
Setting up the LPD Print
3. Advise users to install the Macintosh PPD file.
Users can install the Macintosh PPD file from the Client Utilities CD-ROM. For
more information about the Macintosh PPD file installation and setting up LPR
printing on the Macintosh computer, please see the Printing Guide.
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Mac OS X in a TCP/IP
network using CUPS. Even though IPP printing can be used in a local area network,
this method is commonly used to print over the Internet. If you allow IPP printing
through the Internet, you must configure the DNS server to enable users to access this
equipment over the Internet using the HTTP protocol. This is useful when users want to
print to this equipment from outside the local area network.
NOTE: IPP printing for Macintosh is available only for Mac OS X 10.2.4 to 10.3.x.
Setup procedure
1. Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Functions Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
Mac OS X
Connecting over Internet
Setting up the IPP
printer connection
To Next Page
Loading...
Need help?
General
