Toshiba E-STUDIO520 Network Administration Guide

2. Setting up Network Server
Network Administration Guide — Setting up NetWare Print Server 69
4. When the client workstation is ready to print, it sends the
print job to the Printer Agent, which is a virtual printer image
created in the NDPS network.
5. The NDPS Manager then passes the print jobs to the
TOSHIBA NDPS Gateway.
6. The TOSHIBA NDPS Gateway issues the printing commands
to the printer.
— Installing the TOSHIBA NDPS Gateway
Considerations and Limitations
• The TOSHIBA NDPS Gateway can be installed in servers running NetWare 5.x with
service pack 3A (3.0.1) or higher or NetWare 6.x. A self-extracting executable file
contains both the TOSHIBA NDPS Gateway and a NetWare Admin Snap-in compo-
nent that are necessary to support NDPS printing on the equipment.
• The NDPS Manager can drive several Gateways simultaneously. The TOSHIBA
NDPS Gateway does not interfere with other manufacturer’s Gateways.
• The TOSHIBA NDPS Gateway supports multiple printers; one printer can also be
split between several Gateways to balance the work load.
• Both NDPS and non-NDPS users can share the same printer.
• The TOSHIBA NDPS Gateway supports network configurations that are based on
both a server and the Windows operating system.
Prerequisites
Install NDPS in the NetWare servers. NDPS comes with NetWare 5, but it is not
installed automatically. The NDPS install program extends the NDS schema for three
NDS objects:
• NDPS Manager
• NDPS Broker
• NDPS Printer Agent
To load the TOSHIBA NDPS gateway on NW4, besides loading CLIBAUX.NLM, you
need to have the Novell new localization conversion tables installed in SYS:\SYSTEM.
You can find these files from latest Support pack 8a for NetWare 4.11 or 4.2. After you
extract the support pack compressed file, you must copy the UNI*.NLM files and
LOCNLM32.NLM to SYS:\SYSTEM directory on the server.
Installing the TOSHIBA NDPS Gateway
1. Insert the Client Utilities CD-ROM into the CD-ROM drive on
the administrative workstation.
2. Copy “tndps.exe”, the self extracting executable file from the
CD-ROM to the workstation. Double-click the file to launch
the InstallShield setup program.
3. Follow the Setup Wizard’s prompt to supply the server vol-
ume or Browse to select a mapped drive.

Toshiba E-STUDIO520 Specifications

General

Brand	Toshiba
Model	E-STUDIO520
Category	All in One Printer
Language	English