Toshiba E-STUDIO520 Network Administration Guide

1. Easy Setup Flow
Network Administration Guide — Setup Flow for Printing Features 17
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Print Service Settings
 Setting up the LPD Print
4. Advise users to install the Client Software for Raw TCP or
LPR printing.
Users can install the printer drivers for Raw TCP or LPR printing by installation
from the Client Utilities CD-ROM and add the Raw TCP or LPR port. For more
information about the Raw TCP or LPR installation, please see the Printing
Guide.
In the Raw TCP or LPR enabled network, users must install following client
software for printing:
• Printer Drivers
• TopAccessDocMon
• Agfa Font Manager
Setup Flow for SMB Printing
This equipment can be used with SMB printer connection that allows you to connect to
this equipment using File and Printer Sharing for Microsoft Networks service. SMB
printing is the common method to setting up the printer from the Windows 98/Me com-
puters. However, SMB printing is not suitable for printing a large amount of docu-
ments.
NOTE: It assumes using SMB printing in a small network. If you can use the Windows NT 4.0,
Windows 2000, Windows XP, or Windows Server 2003 as a print server, it is recom-
mended to set up for printing via Windows print server.
 P.20 "Setup Flow for Printing via Windows Print Server"
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Network Environment over TCP/IP
Setting up SMB
Printer Connection

Toshiba E-STUDIO520 Specifications

General

Brand	Toshiba
Model	E-STUDIO520
Category	All in One Printer
Language	English