1. Easy Setup Flow
Network Administration Guide — Setup Flow for Printing Features 25
Setup procedure
1. Setting up the AppleTalk.
Please see the User Functions Guide to configure AppleTalk from the Touch
Panel Display, or from TopAccess.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the AppleTalk Protocol
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the AppleTalk
2. Advise users to install the Macintosh PPD file.
Users can install the Macintosh PPD file from the Client Utilities CD-ROM. For
more information about the Macintosh PPD file installation and setting up
AppleTalk printing on the Macintosh computer, please see the Printing Guide.
Setup Flow for LPR Printing
This equipment can be used with the LPR printer connection when the Macintosh com-
puters and the equipment are connected over the TCP/IP network.
Setup procedure
1. Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
Mac OS 8.6
Mac OS 9.x
Mac OS X
Connecting over TCP/IP Network
Setting up the LPR
printer connection
To Next Page
Loading...
Need help?
General
