Toshiba E-STUDIO520 - Configuring the Equipment Using Topaccess

2. Setting up Network Server
Network Administration Guide — Setting up LDAP Authentication Service 83
7. Make sure that the Dynamic update from DDNS for the Reverse Lookup Zones.
- Right-click the domain in the Forward Lookup Zones and select [Properties].
- Make sure the “Allow dynamic updates?” option is set to “Yes” (for Windows
2000 Server) or “Nonsecure and Secure” (for Windows Server 2003).
NOTE: If setting of Windows Server 2003 is “Secure” mode or “None” for this DDNS function,
you need to add the equipment’s host name manually in the Reversed Lookup Zone.
Configuring the Equipment Using TopAccess
From TopAccess, you must configure the Date & Time, LDAP Session, DNS Session,
DDNS Session and others.
1. Set the same time and date as the LDAP Server in the [Administration] -> [Setup] ->
[General] page.
2. Set the LDAP Session, DNS Session, and DDNS Session in the [Administration] ->
[Setup] -> [Network] page.