1. Easy Setup Flow
Network Administration Guide — Setup Flow for Fax Features 47
To enable the STMP transmission in this equipment, designate the hostname (or spe-
cific domain) that relates to this equipment in the DNS server, and designate the MX
record to receive the Emails that are sent to the equipment’s domain in the SMTP
server in your local area network. Then the SMTP server should be configured to trans-
mit the received Emails to the equipment in the SMTP transmission.
For example, if the hostname of this equipment is designated as “host1.ifax.com”, the
SMTP server receives an Email whose forwarding address is “<account
name>@host1.ifax.com”, and the SMTP server transmits the received Email to the
equipment. Then this equipment will send the received Email as a facsimile document
to the fax number that is specified in the <account name> part.
Setup Procedure
1. Setting up the DNS server and SMTP server.
To enable the transfer of Emails to this equipment through SMTP, you must
designate the domain name of this equipment and the MX record and configure
the SMTP server to route the received documents.
P.78 "Tips of Setting up the DNS and Mail Servers for Offramp Gateway"
2. Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
3. Setting up the DNS Session.
You should set the DNS Session to specify the DNS server.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the DNS Session
4. Setting up the DDNS Session, if required.
If the DNS server supports dynamic DNS service, configure the DDNS Session
to enable the dynamic DNS service.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the DDNS Session
To Next Page
Loading...
Need help?
General
