1. Easy Setup Flow
30 Network Administration Guide — Setup Flow for Printing Features
3. Advise users to install the Unix Filters for Unix printing.
Users can install the Unix filters for Unix printing from the Client Utilities CD-
ROM. For more information about the Unix installation, please see the Printing
Guide.
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Unix workstation in a
TCP/IP network using CUPS. Even though IPP printing can be used in a local area net-
work, this method is commonly used to print over the Internet. If you allow IPP printing
through the Internet, you must configure the DNS server to enable users to access this
equipment over the Internet using the HTTP protocol. This is useful when users want to
print to this equipment from outside the local area network.
Setup procedure
1. Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Functions Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
2. Setting up the DNS Session to be available the services that
use the DNS name with a DNS server.
The DNS Session should be configured when this equipment accesses the
services, servers, and clients using the DNS names instead of IP addresses.
Unix workstation
Connecting over Internet
Setting up the IPP
printer connection
using CUPS
To Next Page
Loading...
Need help?
General
