2. Setting up Network Server
Network Administration Guide — Setting up NetWare Print Server 73
2. Delete the following files using either Windows Explorer or
MS-DOS operating system commands. Check that the files
are not in use before deleting them.
SYS:\SYSTEM\TAGATE.NLM
SYS:\SYSTEM\TAPAP.NLM
SYS:\SYSTEM\TACON.NLM
SYS:\SYSTEM\TALIB.NLM
SYS:\SYSTEM\TACFG.PD0
SYS:\SYSTEM\NLS\4\TAGATE.MSG
SYS:\SYSTEM\NLS\4\TACON.MSG
SYS:\SYSTEM\NLS\4\TALIB.MSG
SYS:\SYSTEM\NLS\4\TACFG.MSG
SYS:\SYSTEM\NLS\4\TAPAP.MSG
SYS:\SYSTEM\NLS\4\TACFG.HLP
SYS:\SYSTEM\NLS\4\TACON.HLP
SYS:\SYSTEM\NLS\4\TALIB.HLP
SYS:\PUBLIC\WIN32\TASNAPIN.PC2
SYS:\PUBLIC\WIN32\TACFG.PD2
SYS:\PUBLIC\WIN32\TOSHIBA.INI
SYS:\PUBLIC\WIN32\TASNMP.DLL
SYS:\PUBLIC\WIN32\NLS\ENGLISH\TARES.DLL
SYS:\PUBLIC\WIN32\NLS\ENGLISH\TACFGRES.DLL
SYS:\PUBLIC\WIN32\NLS\ENGLISH\SC2_MSG.DLL
SYS:\PUBLIC\WIN32\NLS\ENGLISH\HLP25632.DLL
SYS:\PUBLIC\WIN32\NLS\ENGLISH\ROBOEX32.DLL
SYS:\PUBLIC\WIN32\NLS\ENGLISH\SC3_MSG.DLL
Setting up the NetWare in iPrint Mode
This equipment also supports the Novell iPrint.
Using the iPrint system, you can set up the printer that can be accessed using URL
from client computers. The iPrint system is based on the NDPS architecture so that
you must have NDPS installed and configured in the NetWare server.
Before configuring the NetWare file server in NDPS mode, please confirm followings:
• The NDPS Broker, NDPS Manager, and NDPS Printer must be created.
P.65 "Setting up the NDPS with NetWare Administrator"
• The Novell iManager must be installed.
For more information to install the Novell iManager, please see the documentation
for the Novell iManager that is provided by Novell, Inc.
In order to set up the iPrint system, the network administrator must do the following:
1. Installing iPrint
P.73 "Installing iPrint"
2. Enabling the DNS on the Printer Services Manager
P.74 "Enabling DNS on the Printer Services Manager"
3. Enabling iPrint service
P.74 "Enabling iPrint Service"
Installing iPrint
1. Click [Novell] in the GUI screen of NetWare and select
[Install].