1. Easy Setup Flow
16 Network Administration Guide — Setup Flow for Printing Features
Setup Flow for Raw TCP or LPR Printing
This equipment can be used with Raw TCP or LPR printer connection for Windows NT
4.0, Windows 2000, Windows XP, and Windows Server 2003. Raw TCP or LPR print-
ing is the common method to setting up the printer from servers. It is better to use Raw
TCP or LPR printing for Windows NT 4.0, Windows 2000, Windows XP, and Windows
Server 2003 rather than SMB printing because the printing process of Raw TCP or LPR
printing is shorter than SMB printing.
Setup procedure
1. Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
2. Setting up the Raw TCP if required.
If users use Windows 2000, Windows XP, or Windows Server 2003 for printing,
enable the Raw TCP print service. It is recommended to use Raw TCP printing
rather than LPR printing.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Print Service Settings
Setting up the Raw TCP Print
3. Setting up the LPD Print Service.
If any users use Windows NT 4.0, enable the LPD print service.
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Connecting over TCP/IP Network
Setting up the Raw TCP
or LPR printer connection
To Next Page
Loading...
Need help?
General
