Toshiba E-STUDIO520 - 3. Setting Items (User); 1. Setting General Functions; 2. Setting Copy Functions; 3. Setting Fax Functions

2. Setting up Network Server
Network Administration Guide — Setting up NetWare Print Server 65
• Make sure you have a valid IP address for this equipment and for any computers
that will print to it.
• In the equipment setup, enable TCP/IP and enter the IP address, Subnet mask, and
Gateway address for this equipment.
Setting up the NDPS with NetWare Administrator
1. In NetWare Administrator, select the container object to cre-
ate the printer and click the [Object] menu and select [Cre-
ate].
• The New Object dialog box appears.
2. Select “NDPS Broker” and click [OK].
• The Create NDPS Broker Object dialog box appears.
SUPPLEMENT: If the NetWare file server has been installed as supporting the NDPS service, the NDPS
Broker is created as default. In this case, you can use the default NDPS Broker.
3. Specify the “NDPS Broker Name” and “RMS Volume”
options, and click [Create].
• The NDPS Broker is created.
4. Click the [Object] menu and select [Create].
• The New Object dialog box appears.
5. Select “NDPS Manager” and click [OK].
• The Create NDPS Manager Object dialog box appears.
6. Specify the “NDPS Manager Name”, “Resident Server”, and
“Database Volume” option, and click [Create].
• The NDPS Manager is created.
7. Double-click the NDPS Broker object that you created.
• The NDPS Broker dialog box appears.
8. Click [Resource Management (RMS)].
9. Click [Add Resources...].
• The Manage Resources dialog box appears.
10. Select the applicable OS icon in the “Resource Types” list,
and click [Add...].
• The Add Resources dialog box appears.
11. Click [Browse].
• The Select Printer Driver dialog box appears.
12. Insert the Client Utilities CD-ROM into the CD-ROM drive.
• When inserting the Client Utilities CD-ROM, the installer may automatically
start. Click [Cancel] to exit the installer and continue the operation.