2. Setting up Network Server
Network Administration Guide — Setting up Role Based Access Control 89
10. Enter “eBMUserRole” in the “Attribute” field, and enter the
values in the “Values” filed. Then click [Enter].
• When you add the eBMUserRole attribute as a new attribute, select “Add” in
the “Operation” option.
• When you modify the eBMUserRole attribute that you set before, select
“Replace” in the “Operation” option.
SUPPLEMENT: For detailed information about values, please see the description on page 85.
11. Click [Run] and click [Close] to save the settings.
To Next Page
Loading...
