Toshiba TS3000 Series - Turning off the Main Power (TGS3000)

OPERATOR’S MANUAL
series Robot Controller
2.2.5 Turning OFF the Main Power (TS3000)
(1) Function
Turns off the main power and stops controller processing.
(2) Procedures
EMERGENCY
TEACHING
INTERNAL
EXT
(a) Step 1: Turning off the main power.
Set the MAIN POWER switch on the controller to the OFF position, and the
“POWER” LED on the control panel goes out.
SERVO
ON
SERVO
OFF
RUN STOP UF2
UF1
POWER
Go off
LINE
USER
ALARM
TP
SELECT
(3) Cautions
• DO NOT turn off the main power while the servo power is on or during file
operation or any other processing.
• Before turning off the main power, make sure that the servo power is off and
that no active processing is present.
STE 80720
– 2-9 –