Toshiba TS3000 Series - 2.3.5 Turning off the Main Power

OPERATOR’S MANUAL
series Robot Controller
2.3.5 Turning OFF the Main Power
(1) Function
Set the main power to the OFF to stop the controller processes.
(2) Procedures
(a) Step 1: Turning OFF the main power
Set the no-fuse breaker installed outside the controller to the OFF side.
The controller front panel POWER LED and READY LED turn off.
Go off
(3) Cautions
• Do not set the main power to OFF while the servo power is ON or during file
operations or other processes.
• Before turning OFF the main power, be sure to turn OFF the servo power
and check that no processes are running.
STE 80720
– 2-15 –